Hubbardton-forge 104117 Manuel d'utilisateur télécharger pdf

Installation Instructions A190

Ribbon Chandeliers 10-4113, 10-4115, 10-4116 & 10-4117 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

22362 Rev A

To Install the Canopy (Figure 1)

Component Parts

A Ground Screw

B Crossbar

C Lock Nut

D Nipple

E Canopy

F Canopy Loop

G Loop Collar

H Fixture Loop

Caution: Be sure power is off at the main breaker box prior to

installation

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten the crossbar

(B) to the electric box (see illustration).

Note: A new electric box comes with screws. When replacing a

fixture, retain the existing screws for use with the new fixture.

3. Thread the nipple (D) into the crossbar (B) and secure with lock

nut (C); slide canopy (E) over nipple (D), and attach the canopy

loop (F) to the nipple (D). Adjust the nipple to proper length to

ensure a snug canopy fit before proceeding.

4. Attach one end of the chain to the fixture loop (H). Lace the

wire through every other link of the chain to the end. Slip wires

and chain through the collars and canopy (G, F & E). Fasten the

chain to the canopy loop (F), and then slip wires through the

loop and nipple, into the electric box. Make sure to provide

enough slack in the wire to ensure weight of fixture is supported

by the chain.

5. Using suitable wire connectors (not provided) connect fixture

wires to supply wires (white to ribbed side of the fixture s cord,

black to smooth side). Run a pigtail lead from crossbar ground

screw (A) to the junction box and connect all ground wires

(bare copper or green to bare copper or green).

Caution: Make sure wire connectors are twisted on securely,

and no bare wire is exposed.

6. Raise canopy (E) to the ceiling and secure loop collar (G) to

canopy loop (F).

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

A190 1
22362 Rev A 1

Résumé du contenu

Page 1 - 22362 Rev A

Installation Instructions A190 Ribbon Chandeliers 10-4113, 10-4115, 10-4116 & 10-4117 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and

Page 2

Installation Instructions A190 Ribbon Chandeliers 10-4113, 10-4115, 10-4116 & 10-4117 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and

Modèles reliés 104116 | 104115 | 104113 |

Commentaires sur ces manuels

Pas de commentaire

Hubbardton-forge 104117 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hubbardton-forge 104117. Hubbardton Forge 104117 User Manual [en] Manuel d'utilisatio

Résumé du contenu

Modèles reliés 104116 | 104115 | 104113 |

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hubbardton-forge 104117