Hubbardton-forge 126510 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hubbardton-forge 126510. Hubbardton Forge 126510 User Manual [en] Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 3
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
HUBBARDTONFORGE.COM
-, -   
154 RT. 30 SOUTH
CASTLETON, VERMONT 05735
All designs and images ©1989-2013 Hubbardton Forge
®
. All rights reserved.
28094
Assembly & Installation Instructions
If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your xture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.
Install the Fixture (Figure 1)
Component Parts
A Jam Nut E Canopy Ring
B Crossbar F Coupling
C Threaded Nipple G Fixture pipe
D Canopy
CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX
PRIOR TO INSTALLATION.
1. Carefully unpack the xture from the carton.
2. Slide Canopy (D) and Canopy Ring (E) down over pipe as
seen in Figure 1 with the smaller diameter of the ring
facing up.
3. Thread jam nut (A) and crossbar (B) onto threaded nipple (C)
leave parts loose.
4. Using two machine screws (not provided), fasten the cross
bar (B) to the electric box.
Note: A new electric box comes with screws. When replacing a
xture, retain the existing screws for use with the new xture.
5. Adjust the length of threaded nipple (C) in crossbar (B) so
that canopy ring (E) will hold canopy (D) against the ceiling
with no threads showing for best appearance. When
the correct adjustment is established, tighten jam nut (A)
against crossbar (B) to hold the adjustment.
6. Using suitable wire connectors (not provided), connect
xture wires to supply wires (white to white or ribbed
side of the xture cord, black to black or smooth side, and
bare copper to bare copper or green supply). Push wires
back into outlet box.
CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON
SECURELY, AND NO BARE WIRE IS EXPOSED.
7. Slide fixture canopy (D) against ceiling making sure that no
wires are pinched between the canopy and the ceiling.
Secure with canopy ring (E).
A323
Exos Square Shade Semi-Flush 126507 & 126510
Page 1 of 3
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND
PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with
applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.
(Figure 1)
A
B
C
F
(Continued)
D
E
G
Vue de la page 0
1 2 3

Résumé du contenu

Page 1 - . All rights reserved

HUBBARDTONFORGE.COM-, -   154 RT. 30 SOUTH • CASTLETON, VERMONT 05735 All designs and images ©1989-2013 Hub

Page 2

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product. We hope you en

Page 3

HUBBARDTONFORGE.COM-, -   154 RT. 30 SOUTH • CASTLETON, VERMONT 05735 All designs and images ©1989-2013 Hub

Modèles reliés 126507

Commentaires sur ces manuels

Pas de commentaire