Hubbardton-forge 132205 Manuel d'utilisateur télécharger pdf (Page 1)

Assembly & Installation Instructions A194

For Four-Light Pendant 13-2205 Page 1 of 4

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

22423 Rev A

Stem Assembly (Figure 1)

Component Parts

A Fixture Pipe (2)

B Fixture Coupling (2)

1. Carefully unpack the fixture from the carton.

2. Carefully thread fixture pipe (A), threaded end first, over fixture wires.

3. Apply a drop of the supplied thread locking compound to the internal

threads at the top of the fixture coupling (B) and screw stem into fixture,

being careful not to twist the wires.

Note: Application of the thread locking compound is necessary to prevent

the stem from loosening during regular maintenance and cleaning of the

fixture. Be certain to apply the compound.

4. See instructions below to complete the installation.

To Complete Assembly

(Figures 2 & 3)

Component Parts

A Fixture Pipe (2)

C Hex Head Nipple (2)

D Crossbar

E Threaded Stud (2)

F Canopy

G Knurled Ball (2)

H Canopy Pipe (2)

I Plastic Clutch Sleeve (2)

J Clutch (2)

K Set Screw (2)

L Lock Washer (2)

Caution: Be sure power is off at the main breaker box prior to installation.

1. Thread the wires from the fixture pipe (A) into and

through the canopy pipe (H) up through the canopy (F).

2. Unscrew the clutch (J) from the canopy pipe (H); slide it

across the wires and onto the fixture pipe (A). Follow this

with the plastic clutch sleeve (I), oriented so the tapered

end of the clutch sleeve nests in the clutch.

3. Slide the canopy pipe (H) as far as necessary to give you

the total length of the fixture which you desire. Be careful

not to scratch the pipe surfaces and to pull excess wire up

through the canopy pipe (H). Screw clutch (J) onto canopy

pipe (H). There must be a minimum 1-1/2" of inner pipe

inside the outer pipe. Hand-tighten the clutch to

temporarily hold this adjustment. The clutch is not securely

fastened at this point; do not depend on it to hold the fixture.

Important: To ensure full connection strength, be sure the

tapered end of the plastic clutch sleeve is oriented toward the

clutch when assembled and securely tighten set screw (Figure 2).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

(Figure 2)

1 2 3 4

A194 1
22423 Rev A 1

Résumé du contenu

Page 1 - 22423 Rev A

Assembly & Installation Instructions A194 For Four-Light Pendant 13-2205 Page 1 of 4 Hand-Forged, Vermont-Made Lighting and Accessories P.

Page 2

Assembly & Installation Instructions A194 For Four-Light Pendant 13-2205 Page 2 of 4 Hand-Forged, Vermont-Made Lighting and Accessories P.

Page 3

Assembly & Installation Instructions A194 For Four-Light Pendant 13-2205 Page 3 of 4 Hand-Forged, Vermont-Made Lighting and Accessories P.

Page 4

Assembly & Installation Instructions A194 For Four-Light Pendant 13-2205 Page 4 of 4 Hand-Forged, Vermont-Made Lighting and Accessories P.

Commentaires sur ces manuels

Pas de commentaire

Hubbardton-forge 132205 Manuel d'utilisateur Page 1

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hubbardton-forge 132205. Hubbardton Forge 132205 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Hubbardton-forge 132205 Manuel d'utilisateur Page 1

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hubbardton-forge 132205. Hubbardton Forge 132205 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hubbardton-forge 132205