Hubbardton-forge 134505 Manuel d'utilisateur télécharger pdf

Assembly & Installation Instructions A246

For Adjustable Mobius Shade Pendant 13-4505 Page 1 of 7

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

24615

Prepare the Canopy (Figure 1)

Component Parts

A Jam Nut

B Crossbar

C Threaded Nipple

D Canopy

E Canopy Ring

Caution: Be sure power is off at the main breaker box prior to installation.

1. Thread jam nut (A) and crossbar (B) onto threaded nipple (C); leave both parts

loose.

2. Using two machine screws (not provided), temporarily fasten the crossbar (B) to

the electric box.

Note: A new electric box comes with screws. When replacing a

fixture, retain the existing screws for use with the new fixture.

3. Adjust the length of threaded nipple (C) in crossbar (B) so that canopy ring (E)

will hold canopy (D) against the ceiling with no threads showing for best

appearance. When the correct adjustment is established, tighten jam nut (A)

against crossbar (B) to hold the adjustment.

4. Remove the crossbar and stem from the electrical box and proceed with the

assembly instructions.

Complete Assembly & Install Fixture

(Figures 2 & 3)

Component Parts

D Canopy

E Canopy Ring

F Canopy Pipe

G Fixture Pipe

H Plastic Sleeve

I Clutch

J Set Screw

K Ground Screw

L Shade Spider

M Retaining Ring

N Socket

Caution: Be sure power is off at the main breaker box prior to installation.

1. Place canopy (D) over canopy pipe (F), followed by canopy ring (E). Make sure smaller diameter side of canopy

ring is oriented up toward the canopy.

2. Thread wires from the fixture pipe (G) through the canopy pipe (F).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

(Figure 2)

1 2 3 4 5 6 7

A246 1
24615 1

Résumé du contenu

Page 1 - 24615

Assembly & Installation Instructions A246 For Adjustable Mobius Shade Pendant 13-4505 Page 1 of 7 Hand-Forged, Vermont-Made Lighting and

Page 2

Assembly & Installation Instructions A246 For Adjustable Mobius Shade Pendant 13-4505 Page 2 of 7 Hand-Forged, Vermont-Made Lighting and

Page 3

Assembly & Installation Instructions A246 For Adjustable Mobius Shade Pendant 13-4505 Page 3 of 7 Hand-Forged, Vermont-Made Lighting and

Page 4

Assembly & Installation Instructions A246 For Adjustable Mobius Shade Pendant 13-4505 Page 4 of 7 Hand-Forged, Vermont-Made Lighting and

Page 5

Assembly & Installation Instructions A246 For Adjustable Mobius Shade Pendant 13-4505 Page 5 of 7 Hand-Forged, Vermont-Made Lighting and

Page 6

Assembly & Installation Instructions A246 For Adjustable Mobius Shade Pendant 13-4505 Page 6 of 7 Hand-Forged, Vermont-Made Lighting and

Page 7

Assembly & Installation Instructions A246 For Adjustable Mobius Shade Pendant 13-4505 Page 7 of 7 Hand-Forged, Vermont-Made Lighting and

Commentaires sur ces manuels

Pas de commentaire

Hubbardton-forge 134505 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hubbardton-forge 134505. Hubbardton Forge 134505 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hubbardton-forge 134505