Hubbardton-forge 204212 Manuel d'utilisateur télécharger pdf

Installation Instructions B32

For One Light Wall Sconce 20-4012 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

15020 Rev A

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

After installation extra hardware and accessories are possible; our kits are used on multiple products and options.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Fixture

B Screw Cap

C Nipple

D Lock Nut

E Crossbar

F Ground Screw

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided)

attach cross bar (E) to the electric box.

Note: A new electric box comes with

screws. When replacing a fixture, retain the

screws for use with the new fixture.

3. Thread the nipple (C) into the crossbar and

secure with lock nut (D). Adjust the nipple

to proper length to ensure the fixture will fit

snugly to the wall.

4. Using suitable wire connectors (not

provided), connect the fixture wires to the

supply wires, (white to white, black to

black, bare copper or green to bare copper

or green). Ground the crossbar using the

green ground screw (F) to secure a pigtail

lead to the bracket.

If the fixture is wired with twin lead lamp

cord, connect the ribbed side to white, and

the smooth side to black.

Caution: Make sure wire connectors are

twisted on securely and no bare wires are exposed.

5. Carefully tuck all wires behind the fixture, place fixture

firmly against the wall and fasten screw cap (B).

6. See instructions following to install bulb and glass.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

Figure 1

1 2

15020 Rev A 1

Résumé du contenu

Page 1 - 15020 Rev A

Installation Instructions B32 For One Light Wall Sconce 20-4012 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154

Page 2

Installation Instructions B32 For One Light Wall Sconce 20-4012 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154

Modèles reliés 204012

Commentaires sur ces manuels

Pas de commentaire

Hubbardton-forge 204212 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hubbardton-forge 204212. Hubbardton Forge 204212 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés 204012

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hubbardton-forge 204212