Hubbardton-forge 207690 Manuel d'utilisateur télécharger pdf

HUBBARDTONFORGE.COM

-, -   

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

30047

Installation Instructions

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.

We hope you enjoy your xture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.

Please Note: This fixture is designed to be mounted on a standard wall

surface and may not be suitable for all applications. If installing in a non-

wood frame application, we recommend consulting a qualified builder

or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Crossbar

B Ground Screw

C Threaded Stud (2)

D Knurled Balls (2)

E Fixture Assembly

CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX

PRIOR TO INSTALLATION.

1. Carefully unpack the xture from the carton.

2. Using two machine screws (not provided), fasten the cross-

bar (A) to the electric box making sure that xture mounting

holes are level.

Note: A new electric box comes with screws. When replacing a

xture, retain the existing screws for use with the new xture.

3. Thread studs (C) into the appropriate holes in the crossbar

(A). Adjust the studs to proper length to ensure the

xture will t snugly to the wall.

4. Hold the xture assembly (E) close to the wall and using

suitable wire connectors, (not provided), connect xture

wires to supply (white to white and black to black).

Run a pigtail lead from the crossbar ground screw (B) and

connect all ground wires (bare copper or green to

bare copper or green).

CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON

SECURELY, AND NO BARE WIRE IS EXPOSED.

5. Slide fixture assembly (E) over threaded studs (C) and

push firmly to wall, making sure that no wires are pinched

between fixture back and wall. Fasten with knurled

balls (D). Be sure threaded studs (C) are fully seated in the

knurled balls (D).

6. See instructions on next page to install shade.

B303

Oceanus Shade Sconce Vintage Platinum 207690

Page 1 of 2

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND

PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with

applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

(Figure 1)

(Continued)

1 2

Installation Instructions 1

Résumé du contenu

Page 1 - Installation Instructions

Page 2

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product. We hope you en

Commentaires sur ces manuels

Pas de commentaire

Hubbardton-forge 207690 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hubbardton-forge 207690. Hubbardton Forge 207690 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hubbardton-forge 207690