Hubbardton-forge 126740 Manuel d'utilisateur télécharger pdf

Installation Instructions A278

For Semi-Flush 12-6740 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

26636

To Install Fixture (Figure 1)

Component Parts

A Canopy

B Cross Bar

C Threaded Stud (2)

D Knurled Balls (2)

E Ground Screw

Caution: Be sure power is off at the main

breaker box prior to installation

1. Thread studs (C) through appropriate

holes in cross bar (B) to match hole

centers in canopy (A). Move ground

screw (E) to another available threaded

hole if necessary.

2. Using two machine screws (not

provided) fasten cross bar (B) to the

electric box using outer oval holes to

orient fixture to desired hanging

position.

Note: A new electric box comes with

screws. When replacing an existing

fixture, retain the screws for use with the

new fixture.

3. Using suitable wire connectors (not

provided); connect fixture wires to

supply wires (white to white and black to

black). Run a pigtail lead from crossbar

ground screw (E) to the function box and

connect all ground wires (Bare copper or

green to bare copper or green).

Caution: Make sure wire connectors are

twisted on securely, and no bare wire is

exposed.

4. Slide fixture canopy (A) over threaded

studs and push firmly to ceiling, making sure that no wires are pinched between fixture canopy and ceiling. Fasten

with knurled balls (D). Be sure studs (C) are fully seated in knurled balls (D)

(continued)

(Figure 1)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

1 2

26636 1

Résumé du contenu

Page 1 - 26636

Installation Instructions A278 For Semi-Flush 12-6740 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Route 30

Page 2

Installation Instructions A278 For Semi-Flush 12-6740 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Route 30

Commentaires sur ces manuels

Pas de commentaire

Hubbardton-forge 126740 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hubbardton-forge 126740. Hubbardton Forge 126740 User Manual [en] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hubbardton-forge 126740