HUBBARDTONFORGE.COM
-, -
154 RT. 30 SOUTH
•
CASTLETON, VERMONT 05735
All designs and images ©1989-2013 Hubbardton Forge
®
. All rights reserved.
19909
Assembly & Installation Instructions
If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your xture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.
To Install Fixture (Figure 1)
Component Parts
A Ground Screw
B Cross Bar
C Threaded Stud (3)
D Canopy
E Barrel Knobs (3)
CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX
PRIOR TO INSTALLATION.
1. Carefully unpack the xture from the carton.
2. Thread studs (C) through appropriate holes in cross bar (B)
to match hole centers in canopy (D). Move ground screw (A)
to another available threaded hole if necessary.
3. Using two machine screws (not provided) fasten cross bar
(B) to the electric box using outer oval holes to orient xture
to desired hanging position.
Note: A new electric box comes with screws. When replacing an
existing xture, retain the screws for use with the new xture.
4. Using suitable wire connectors (not provided); connect
fixture wires to supply wires (white to white and black
to black). Connect all ground wires to green
ground screw (A).
CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON
SECURELY, AND NO BARE WIRE IS EXPOSED.
6. Slide fixture canopy (D) over threaded studs and push firmly
to ceiling, making sure that no wires are pinched between
fixture canopy and ceiling. Fasten with barrel knobs
(E). Be sure studs (C) are fully seated in barrel knobs (E).
A125
For Exos Semi-Flush 126503
Page 1 of 3
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND
PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with
applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.
A
(Figure 1)
C
B
D
E
(Figure 1)
(Continued)
Commentaires sur ces manuels