Hubbardton-forge 18493 Manuel d'utilisateur télécharger pdf

Assembly & Installation Instructions A228

For Staccato Adjustable Pendant 18-493 Page 1 of 3

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

24156

Stem Assembly

(Figure 1)

Component Parts

A Fixture Pipe

B Fixture Coupling

1. Carefully unpack the fixture from the carton.

2. Carefully thread fixture pipe (A), threaded end first, over fixture wires.

3. Apply a drop of the supplied thread locking compound to the internal threads of fixture

coupling (B) and screw stem into fixture, being careful not to twist or pinch the wires.

Note: Application of the thread locking compound is necessary to prevent the stem from

loosening during regular maintenance and cleaning of the fixture. Be certain to apply the

compound.

4. See instructions below to complete the installation.

Prepare the Canopy

(Figure 2)

Component Parts

C Jam Nut (2)

D Crossbar

E Threaded Nipple

F Canopy

G Canopy Ring

Caution: Be sure power is off at the main breaker box prior to installation.

1. Thread jam nuts (C) and crossbar (D) onto threaded nipple (E); leave parts loose.

Note: Fixture comes with two jam nuts but in most cases only one is needed.

2. Using two machine screws (not provided), temporarily fasten the crossbar (D) to the

electric box.

Note: A new electric box comes with screws. When replacing a fixture, retain the

existing screws for use with the new fixture.

3. Adjust the length of threaded nipple (E) in crossbar (D) so that canopy ring (G) will

hold canopy (F) against the ceiling with no threads showing for best appearance.

When the correct adjustment is established, tighten jam nut (C) against crossbar (D)

to hold the adjustment.

4. Remove the crossbar and stem from the electrical box and proceed with the

assembly instructions.

(continued)

(Figure 1)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 2)

1 2 3

A228 1
24156 1

Résumé du contenu

Page 1 - 24156

Assembly & Installation Instructions A228 For Staccato Adjustable Pendant 18-493 Page 1 of 3 Hand-Forged, Vermont-Made Lighting and Acce

Page 2

Assembly & Installation Instructions A228 For Staccato Adjustable Pendant 18-493 Page 2 of 3 Hand-Forged, Vermont-Made Lighting and Acce

Page 3

Assembly & Installation Instructions A228 For Staccato Adjustable Pendant 18-493 Page 3 of 3 Hand-Forged, Vermont-Made Lighting and Acce

Commentaires sur ces manuels

Pas de commentaire

Hubbardton-forge 18493 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hubbardton-forge 18493. Hubbardton Forge 18493 User Manual [en] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hubbardton-forge 18493