Hubbardton-forge 207843 Manuel d'utilisateur télécharger pdf

Installation Instructions B31

For Heavy Bracket Mounted Bath Style Fixtures

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum watta

e noted on fixture. Use onl

recommended bulbs with fixture.

For fixtures requiring assembly, please refer to assembly instructions before installation.

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

Component Parts

A Wall Mount Bracket

B Anchors

C #10 Screws

D Fixture

E #8 Black Screws

F Green Ground Screw

G Cupped Washer

To Install

Caution: Be sure power is off at the main breaker box prior to installation.

Caution: This fixture is heavy and must be securely fastened to at least one framing member.

1. Center the wall mount bracket (A) over the electrical box being sure to hold it plum and level. With a pencil, mark

the location of all mounting holes in the wall mount bracket on the wall behind. Put the wall mount bracket down

and drill 1/4" holes in the locations marked on the wall. It may be necessary to drill new holes in the mounting

bracket to allow for attachment to a framing stud. Place the tapered end of the anchors (B) into the holes and

gently tap them flush to the wall using a light weight

hammer.

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

14819 revC

2. Thread the wires in the electrical box through the

center hole in the wall mount bracket while moving

the bracket into position. Using the 1" #10 screws

(C), screw the bracket securely to the wall. Be careful

not to over-tighten or strip the anchors. Make certain

that bracket is attached directly to at least one framing

member.

3. Thread the black # 8 screws (E) up through the holes

in the top of the wall mount bracket. Leave the

bottom screws out for now.

4. Hold the fixture assembly (D) close to the wall mount

bracket and using suitable wire connectors (not

provided), connect fixture wires to supply wires (white to white, black to black, and bare copper or green to bare

copper or green). Ground the mounting bracket using the green ground screw (F) and cupped washer (G) to secure

a pigtail lead to the bracket.

Caution: Make sure wire connectors are twisted on securely, and no bare wires are exposed.

5. Carefully tuck all wires behind the fixture assembly and inside the wall mount bracket and place the fixture over

the bracket so that the screws in the top of the bracket go through the holes in the top of the fixture. Secure the

fixture by threading the remaining black #8 screws up through the holes in the bottom of the fixture and into the

mounting bracket.

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased

this product. We hope you enjoy your fixture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

14819 revC 1

Résumé du contenu

Page 1 - 14819 revC

Installation Instructions B31 For Heavy Bracket Mounted Bath Style Fixtures CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS

Modèles reliés 207833 | 207380 | 207370 | 203223 |

Commentaires sur ces manuels

Pas de commentaire

Hubbardton-forge 207843 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hubbardton-forge 207843. Hubbardton Forge 207843 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés 207833 | 207380 | 207370 | 203223 |

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hubbardton-forge 207843