Hubbardton-forge 204712 Manuel d'utilisateur télécharger pdf

Installation Instructions B190

For Antasia Sconce 20-4712L & 20-4112R Page 1 of 3

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

22864

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

Please Note: After installation extra hardware and accessories are possible; our kits are used on multiple products and

options.

To Mount Fixture to Wall with Single Box (Figure 1)

Component Parts

A Crossbar

B Threaded Stud

C Barrel Knob

D Fixture Assembly

E Ground Screw

F Cupped Washer

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided),

fasten the crossbar (A) to the electric box

making sure crossbar is level.

Note: A new electric box comes with screws.

When replacing a fixture, retain the existing

screws for use with the new fixture.

3. Thread stud (B) into the appropriate hole in the

crossbar (A). Adjust the stud to proper length to

ensure the fixture will fit snugly to the wall.

4. Hold the fixture assembly (D) close to the wall

and using suitable wire connectors, not

provided, connect fixture wires to supply (white

to white or ribbed and black to black or

smooth). Ground the crossbar (A) using the

green ground screw (E) and cupped washer (F)

to secure a pigtail lead to the bracket. .

Caution: Make sure wire connectors are

twisted on securely, and no bare wire is

exposed.

5. Slide fixture assembly (D) over threaded stud

(B) and push firmly to wall, making sure that no

wires are pinched between fixture back and wall.

Fasten with barrel knob (C). Be sure threaded stud

(B) is fully seated in the barrel knob (C).

6. See instructions following to install glass.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2 3

B190 1
22864 1

Résumé du contenu

Page 1 - 22864

Installation Instructions B190 For Antasia Sconce 20-4712L & 20-4112R Page 1 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O.

Page 2

Installation Instructions B190 For Antasia Sconce 20-4712L & 20-4112R Page 2 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O.

Page 3

Installation Instructions B190 For Antasia Sconce 20-4712L & 20-4112R Page 3 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O.

Commentaires sur ces manuels

Pas de commentaire

Hubbardton-forge 204712 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hubbardton-forge 204712. Hubbardton Forge 204712 User Manual [en] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hubbardton-forge 204712