Hubbardton-forge 206251 Manuel d'utilisateur télécharger pdf

Installation Instructions B239

Banded Wall Torch 20-6251 Page 1 of 3

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

26945

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

After installation extra hardware and accessories are possible; our kits are used on multiple products and options.

To Mount Fixture to Wall with Single Box (Figure 1)

Component Parts

A Crossbar

B Ground Screw

C Nipple

D Lock Nut

E Threaded Cap

F Fixture Assembly

Caution: Be sure power is off at the main breaker box

prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten

the crossbar (A) to the electric box making sure

crossbar is level.

Note: A new electric box comes with screws.

When replacing a fixture, retain the existing

screws for use with the new fixture

3. Thread the nipple (C) into the crossbar (A) and

secure with lock nut (D). Adjust the nipple to

proper length to ensure the fixture will fit snugly

to the wall.

4. Ground the crossbar (A) by securing a pigtail lead

around ground screw (B).

5. Hold the fixture assembly (F) close to the wall and

using suitable wire connectors, not provided,

connect fixture wires and pigtail leads to supply

wires (white to white or ribbed, black to black or

smooth and green to green or bare).

Caution: Make sure wire connectors are twisted

on securely, and no bare wire is exposed.

6. Carefully tuck all wires behind the fixture, place fixture

firmly against the wall and fasten with threaded cap (E).

7. See instructions following to install wall plate.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2 3

26945 1

Résumé du contenu

Page 1 - 26945

Installation Instructions B239 Banded Wall Torch 20-6251 Page 1 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Route

Page 2

Installation Instructions B239 Banded Wall Torch 20-6251 Page 2 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Route

Page 3

Installation Instructions B239 Banded Wall Torch 20-6251 Page 3 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Route

Commentaires sur ces manuels

Pas de commentaire

Hubbardton-forge 206251 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hubbardton-forge 206251. Hubbardton Forge 206251 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hubbardton-forge 206251