Hubbardton-forge 207450 Manuel d'utilisateur télécharger pdf

HUBBARDTONFORGE.COM

-, -   

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

28806 Rev A

Installation Instructions

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.

We hope you enjoy your xture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.

Please Note: This fixture is designed to be mounted on a standard

wall surface and may not be suitable for all applications. If installing in

a non-wood frame application, we recommend consulting a qualified

builder or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Fixture Assembly

B Wall Mount Bracket

C Anchors (4)

D #10 Screws (4)

CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX

PRIOR TO INSTALLATION.

1. Carefully unpack the xture from the carton.

2. Center the wall mount bracket (B) over the electrical box

being sure to hold it plum and level. With a pencil, mark the

location of all mounting holes in the wall mount bracket on

the wall behind.

3. Put the wall mount bracket down and drill 1/4" holes in the

locations marked on the wall. For holes using anchors,

place the tapered end of the anchors (C) into the holes and

gently tap them ush to the wall using a light weight

hammer.

4. Thread the wires in the electrical box through the center

hole in the wall mount bracket while moving the bracket into

position. Using the #10 screws (D), screw the bracket

securely to the wall. Be careful not to over-tighten or strip

the anchors.

5. Hold the fixture assembly (A) close to the wall mount

bracket and using suitable wire connectors (not provided),

connect fixture wires to supply wires (white to white and

black to black). Ground the mounting bracket using the

green ground screw (F) and cupped washer (G) to secure

a pigtail lead to the bracket and connect all ground wires

(bare copper or green to bare copper or green).

B295

Pluto Sconce Small Vintage Platinum: 207450

Page 1 of 2

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND

PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with

applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.

(Figure 1)

(Continued)

E #8 Black Screws (4)

F Green Ground Screw

G Cupped Washer

1 2

Installation Instructions 1

Résumé du contenu

Page 1 - Installation Instructions

Page 2

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product. We hope you en

Commentaires sur ces manuels

Pas de commentaire

Hubbardton-forge 207450 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hubbardton-forge 207450. Hubbardton Forge 207450 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hubbardton-forge 207450