Hubbardton-forge 217394 Manuel d'utilisateur télécharger pdf

Installation Instructions B4

For Direct Wire Wall Mounted Fixtures - A

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum watta

e noted on fixture. Use onl

recommended bulbs with fixture.

For fixtures requiring assembly, please refer to assembly instructions before installation.

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

Component Parts

A Screw Cap

B Nipple

C Lock Nut

D Green Ground Screw

E Box Machine Screws (not

provided)

F Black Wire

G Ground Wire

H White Wire

I Crossbar

To Install

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (E, not provided) fasten the

crossbar (I) to the electric box (see illustration).

Note: A new electric box comes with screws. When

replacing a fixture, retain the existing screws for use

with the new fixture.

4. Thread the nipple (B) into the crossbar and secure with

lock nut (C). Adjust the nipple to proper length to

ensure the fixture will fit snugly to the wall.

5. Using suitable wire connectors (not provided) connect

fixture wires to supply wires—white to white (H) and

black to black (F). If the fixture is wired with twin lead

lamp cord, connect white to ribbed side of the fixtures

cord, black to smooth side. Connect all ground wires

(G) to crossbar ground screw (D).

Caution: Make sure wire connectors are twisted on

securely, and no bare wire is exposed.

6. Place fixture firmly against wall and fasten with screw

cap (A).

This illustration represents a typical

fixture and may not match every style.

7. Install light bulb(s) (not provided).

8. Restore electricity at main breaker.

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased

this product. We hope you enjoy your fixture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

14032 RevA

14032 RevA 1

Résumé du contenu

Page 1 - 14032 RevA

Installation Instructions B4 For Direct Wire Wall Mounted Fixtures - A CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSO

Modèles reliés 217185 | 204527 | 204213 |

Commentaires sur ces manuels

Pas de commentaire

Hubbardton-forge 217394 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hubbardton-forge 217394. Hubbardton Forge 217394 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés 217185 | 204527 | 204213 |

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hubbardton-forge 217394