Hubbardton-forge 124710 Manuel d'utilisateur télécharger pdf

Assembly & Installation Instructions A208

For Antasia Semi-Flush 12-4710 & 12-4710E Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

22811

Please Note: After installation extra hardware and accessories are possible due to our kits are used on multiple products

and options.

To Assemble Fixture

(Figure 1)

Component Parts

A Fixed Arms (2)

B Loose Arm

C Glass

D Screw

1. Carefully unpack the fixture from the carton.

2. Loosen and remove screw (D) allowing loose arm (B) to be removed. Save for later use. Note: Arm is shipped

installed.

3. Slip glass (C) into two fixed arms (A).

4. Slip loose arm (B) up through hole in canopy and attach with screw (D) until snug.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

Assembly & Installation Instructions A208 For Antasia Semi-Flush 12-4710 & 12-4710E Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Ac

Page 2

Assembly & Installation Instructions A208 For Antasia Semi-Flush 12-4710 & 12-4710E Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Ac

Pas de commentaire

Hubbardton-forge 124710 Manuel d'utilisateur